SUPAK'S Metal Buildings, Steel Buildings
Supak's Inc BBB Business Review     Facebook



Product Component List
Photo Class Description Ascending
  Trim ( Building ) 

Eave Trim ( Simple )

 
  Accessories 1 

#3 Deck Tite

This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
 
  Accessories 1 

#4 Deck Tite

This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
 
  Accessories 1 

#5 Deck Tite

This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
 
  Accessories 1 

#6 Deck Tite

This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
 
  Roofing Panels 

.PBR-Panel

This panel has a 1-1/4" tall rib 12" on center with 2 minor ribs in between along with one extended rib at the lap side. ( Panel coverage= 36" )Available in 26 gauge galvalume & 30 year smp color. Installed only in one direction.
 
  Roofing Panels 

.PBU-Panel

This panel has a 3/4" tall rib 6" on center with one extended rib at the lap side. ( Panel coverage= 36") Available in 26 gauge galvalume and 30 year smp color. May be installed in one direction only.
 
  Insulation Type 

1" Radiant Barrier (Company Std.)

This insualtion has a reinforced white vinyl faced vapor barrier with 3/4" of fiberglass and a reflective aluminium heat barrier.
 
  Sealants 

1" Tape Seal (40' Roll)

This is as 1" wide mastic sealant that comes in 40' rolls and is used to seal the side laps & butt laps of the roofing panels.
 
  Roofing Panels 

12" Standing Seam 1" Snap Lock

This is a snap lock panel with a 1" tall rib at the edge of the panel with a prepunched fastner strip . ( Coverages 12") Available in 26 gauge galvalume and 30 year smp color. May be installed in one direction only.
 
  Roofing Panels 

12" Standing Seam 1-1/2" Mech. Seam

This is a mechanical seamed panel with a 1-1/2" tall rib at the edge of the panel. Panels are fastened with clips then the side laps are crimped with a seaming tool. ( Coverages 12") Available in 26 & 24 gauge galvalume and 30 year smp color. May be installed in one direction only.
 
  Roofing Panels 

14" Standing Seam 1-3/4" Snap Lock

This is a snap lock panel with a 1-3/4" tall rib at the edge of the panel. Panels are fastened with clips. ( Coverages 14") Available in 26 & 24 gauge galvalume and 30 year smp color. May be installed in one direction only.
 

SUPAK's Building Supply has been building custom metal buildings for over 30 years. We can design and build a custom building for you.


HomeProductsBuilding QuoteProduct QuoteSteel Parts QuoteContact
SUPAK'S Building Supply, INC.
907 East Business Hwy. 71 La Grange, Tx 78945 • Phone (979)968-5654 • FAX: (979)968-6524
© Copyright 2009-2015 All Rights Reserved