| Photo |
Class
|
Description
|
 |
Roofing Panels |
Custom Describe In Note Section
|
| |
Red Iron |
Select Member Type
|
| |
Red Iron |
C-Purlin
C-Purlin Is A Member That Attaches to the Wall Column Or Rafter Which in then the Roofing Or Wall Panel Attaches to.
|
| |
Red Iron |
Z-Purlin
Z-Purlin Is A Member That Attaches to the Wall Column Or Rafter Which in then the Roofing Or Wall Panel Attaches to.
|
| |
Red Iron |
Double Slope Eave Strut
This is a structural member located at the eave of the building where the roof panels meet the sidewall panels. On this member the top and bottom flanges of member follow the roof slope. (This is the most commonly used eave strut )
|
| |
Red Iron |
Single Slope Eave Strut
This is a structural member located at the eave of the building where the roof panels meet the sidewall panels. The bottom flange remains horizontal where only the top flange follows the roof slope. ( Mainly used on flat top columns)
|
| |
Red Iron |
2" x 2" Base Angle
This is a L-Shaped member that is usually attached to the foundation onto which the bottom of the wall panels are attached to.
|
| |
Red Iron |
4" x 2" Base Angle
This is a L-Shaped member that is usually attached to the foundation onto which the bottom of the wall panels are attached to.
|
| |
Accessories 1 |
Select Item
|
| |
Accessories 1 |
Double Stick Tape
This tape is applied to the structural member and is used to help hold the insualtion in place untill the wall or roof panel is secured.
|
| |
Accessories 1 |
Vinyl Insulation Patch Tape
This is a tape that's made of the same material as the vapor barrier and is used to patch any snags or tears made to the insulation during installation.
|
| |
Accessories 1 |
Other ( Describe In The Note Section )
Please Describe In Detail On The Component Quote Request Form On What You Would Like On Your Building And We'll See If We Can Find It.
|
