| Photo |
Class
|
Description
|
 |
Trim ( Building ) |
Eave Trim ( Simple )
|
| |
Accessories 1 |
#3 Deck Tite
This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
|
| |
Accessories 1 |
#4 Deck Tite
This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
|
| |
Accessories 1 |
#5 Deck Tite
This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
|
| |
Accessories 1 |
#6 Deck Tite
This is a flexable rubber boot that seals around plumbing vent pipes pertruding through the roof surface.
It shapes to the roof slope and panel profile. ( Fits pipes 1" thru 4" )
|
| |
Roofing Panels |
.PBR-Panel
This panel has a 1-1/4" tall rib 12" on center with 2 minor ribs in between along with one extended rib at the lap side. ( Panel coverage= 36" )Available in 26 gauge galvalume & 30 year smp color. Installed only in one direction.
|
| |
Roofing Panels |
.PBU-Panel
This panel has a 3/4" tall rib 6" on center with one extended rib at the lap side. ( Panel coverage= 36") Available in 26 gauge galvalume and 30 year smp color. May be installed in one direction only.
|
| |
Insulation Type |
1" Radiant Barrier (Company Std.)
This insualtion has a reinforced white vinyl faced vapor barrier with 3/4" of fiberglass and a reflective aluminium heat barrier.
|
 |
Sealants |
1" Tape Seal (40' Roll)
This is as 1" wide mastic sealant that comes in 40' rolls and is used to seal the side laps & butt laps of the roofing panels.
|
| |
Roofing Panels |
12" Standing Seam 1" Snap Lock
This is a snap lock panel with a 1" tall rib at the edge of the panel with a prepunched fastner strip . ( Coverages 12") Available in 26 gauge galvalume and 30 year smp color. May be installed in one direction only.
|
| |
Roofing Panels |
12" Standing Seam 1-1/2" Mech. Seam
This is a mechanical seamed panel with a 1-1/2" tall rib at the edge of the panel. Panels are fastened with clips then the side laps are crimped with a seaming tool. ( Coverages 12") Available in 26 & 24 gauge galvalume and 30 year smp color. May be installed in one direction only.
|
| |
Roofing Panels |
14" Standing Seam 1-3/4" Snap Lock
This is a snap lock panel with a 1-3/4" tall rib at the edge of the panel. Panels are fastened with clips. ( Coverages 14") Available in 26 & 24 gauge galvalume and 30 year smp color. May be installed in one direction only.
|
1 of 8
